ZEST HOOD Instructions Manual www.rangemaster.co.uk
EN 110 BC • Pay attention to the direction in which the Plate is fixed to the ceiling. • Insert the safety knobs (c
EN 111 • Pass the Cables into the slots on the threaded pawls (a) and tighten the cable locking screws (b) into the pawls themselves. •
EN 112 LEVELLING THE HOOD • The hood canopy must be levelled. • The Hood is levelled by adjusting the safety pawls C. • Rest a spirit l
EN 113 FIXING THE POWER SUPPLY CABLE • Tighten the power supply cable and fix it to the Bracket on the ceiling mounted Plate, using the tongue
EN 114 USE Control panel L T1S1 Button Function Led L Turns the lights ON/OFF at maximum intensity. - Press and hold the button for approxim
EN 115 REMOTE CONTROL The appliance can be controlled using a remote control pow-ered by a 1.5 V carbon-zinc alkaline batteries of the standard
EN 116 MAINTENANCE Grease filter The filter must be cleaned every 2 months of operation, or more fre-quently for particularly heavy usage, and
2 2 INDEX RECOMMENDATIONS AND SUGGESTIONS...
991.0302.745_ver2 AGA RANGEMASTER GROUP PLC
EN33RECOMMENDATIONS AND SUGGESTIONS The Instructions for Use apply to several versions of this appliance. Accordingly, you may find descriptions of i
EN 4 4 CHARACTERISTICS Components Ref. Q.ty Product Components 1 1 Hood Canopy complete with: Controls, Light, Filters, Motor. 2 1 Hood
EN 5 5 Dimensions
EN66INSTALLATIONThis hood is designed to be mounted on the ceiling/on a shelf, above a free-standing Hob (min. 650 mm), in: • Recirculation version: I
EN77Ceiling/Shelf drilling and Plate Fixing CEILING/SHELF DRILLING • Use a plumb-line and mark the centre of the cooking hob on the Support Ceiling/S
EN 8 8 FIXING THE PLATE • Lift up the Fixing plate and fit the slots onto the two screws previously inserted in the ceiling, and turn until th
EN99abcCONNECTING HOOD-PLATE CABLES N.B. Before proceeding with installation the Hood must be raised to a height of at least 650 mm above the cook
Komentáře k této Příručce