VESPER Instructions Manual www.rangemaster.co.uk
EN110CONNECTING HOOD-PLATE CABLES N.B. Before continuing with installation it is necessary to move the hood to a height of at least 650 mm from the co
EN 111 • Attention to the direction of the plate fixed to the ceiling (the limit pawl on the plate fastened to the ceiling has a correspon
EN 112 • Pass the cables through the slots in the threaded pawls (a) and screw the cable locking screws (b) to the pawls them-selves.
EN 113 • At this point it is possible to connect up the hood, and the lamp if there is one, to the power supply using the respective power cab
EN 114 Connections AIR OUTLET - DUCTING VERSION To install the hood in the ducting version, please refer to the instructions provided in the du
EN 115 LEVELLING THE HOOD • The hood mobile unit must be levelled to allow the movement to operate properly. • The hood is levelled by adjus
EN 116 FIXING THE POWER SUPPLY CABLE • Wind the power cable around its axis so that it forms a spiral from the mobile body to the plate in t
EN 117 FITTING THE GLASS (OR OTHER MATERIAL) • Take the lamps and insert them in the lamp holders. • They do not have to be screwed in, but s
EN 118 USE Control panel L T1 Button Function Display L Turns the lights On/Off. - T1 Hood Down Press for 2 seconds to raise the Hood. Press
EN 119 REMOTE CONTROL The appliance can be controlled using a remote control powered by a 1.5 V carbon-zinc alkaline batteries of the standard
2 2 INDEX RECOMMENDATIONS AND SUGGESTIONS ...
EN 220 MAINTENANCE Grease filter The filter must be cleaned every 2 months of opera-tion, or more frequently for particularly heavy usage, and
EN 221 Lighting LIGHT REPLACEMENT 20 W halogen light. • Remove the snap-on lamp cover by levering it from under the metal ring, supporting it
EN 222 Additional information for the installation technician • Open the lighting unit by pulling on the notch provided. • Apply the label,
991.0302.950_ver1 AGA RANGEMASTER GROUP PLC
EN33RECOMMENDATIONS AND SUGGESTIONS The Instructions for Use apply to several versions of this appliance. Accordingly, you may find descriptions of i
EN 4 4 CHARACTERISTICS Components Ref. Q.ty Product Components 1 1 Hood Canopy complete with: Controls, Light, Filters, Motor. 2 1 Hood sup
EN 5 5
EN 6 6 Dimensions
EN 7 7 INSTALLATION This hood is designed to be mounted on the ceiling/on a shelf, above a free-standing Hob (min. 650 mm), in: • Ducting vers
EN88Ceiling/Shelf drilling and Plate Fixing CEILING/SHELF DRILLING • Use a plumb-line and mark the centre of the cooking hob on the Support Ceiling/S
EN 9 9 FIXING THE PLATE • Lift up the fixing plate, taking care to ensure that the limit pawl is positioned frontally. • Fit the slots onto t
Komentáře k této Příručce